Two kitchens of the same size can be priced very differently. The difference is in the choices: what the doors are made of, how they are finished, what is behind them and how much of it there is. These are the choices that move a cabinetry quote, roughly in the order they matter.
How much cabinetry there is
The number of boxes and their height set the base of any quote. Cabinets that run to the ceiling use more material than uppers that stop short of it, and a tall pantry wall is more cabinetry than a run of base units with open wall above. An island with storage on both sides counts as two runs.
Drawers or doors
A drawer has a box, a front and a pair of slides; a door has a front and two hinges. A kitchen planned with deep drawers in place of base doors works better day to day and costs more to build. Inner drawers behind a door, pull-outs and organisers add to it again.
The door style
A flat slab door is the simplest to make. Shaker and slim shaker doors are built from five pieces. Fluted, reeded, raised panel and arched doors take more machining, and inset doors, which sit inside a face frame, take more parts and more fitting than full overlay doors. See frameless or inset cabinets.
The finish
Laminates are made in the panel and need no finishing in the shop. Painted doors are sprayed in several coats. Stained white oak and walnut start from veneered or solid wood with the grain matched across the doors. Each step up adds work. See painted, stained or laminate.
What is inside
Most cabinets have maple melamine interiors. Painted or stained interiors, used behind glass doors and in open cabinets, cost more because the inside of the box is finished like the outside.
Glass, metal, mirror and light
Glass doors in aluminium or wood frames, metal trims and linings, mirror backs, arched niches and LED inside the cabinets each add parts and labour. They are often where a room gets its character, so they are worth choosing deliberately.
Hardware
Soft-close hinges and undermount slides come with every cabinet. Long pulls, specialty knobs and posted bar pulls in brass or bronze, and lift systems for upper doors, are priced per piece.
Stone
The stone is priced by the slabs it takes. Full-height backsplashes, stone hoods, waterfalls and mitred edges use more of the slab than a counter and a short splash. The stone takeoff in your drawings shows every piece on the slab and the slab count, so you can see what a choice costs before you make it.
The room itself
High ceilings, walls that are out of plumb, rooms that need fillers and scribes, and deliveries up stairs all take more time on site. The in-person measure before we build is where these are confirmed.
The fastest way to see what your room costs is to draw it. Lay it out in the design studio and send it for a quote, or send us your plans.